Jet Ski Trailers

   



 
BigFoot Features & Specifications
21” diameter by 12” wide balloon tire is standard. Rolls easily over any surface. 2 ply tubeless design. Aircraft grade aluminum alloy with 1” stainless axle and hardware for strength and corrosion protection. Welded framework and supports resulting in superior strength. Rugged, durable yet lightweight construction. 2” diameter support rails covered with PVC then marine grade polyolefin carpet to best protect the hull. Fully adjustable Stoltz polyethylene bow support. 1200 lb. capacity galvanized winch. Replaceable nylon wheel bushings or optional heavy duty oil filled brass. Optional ATV coupler kit for low speed towing. Available for 1 7/8” or 2” ball. Optional Stoltz 12” polyethylene keel roller and bracket assembly for even easier loading.

Made in America, not imported.


 

Bigfoot 6-Wheel – Biggest Beach Dolly on the Market
We made a bigger Bigfoot before, but not this big. So here it is, the biggest Bigfoot, and the biggest of all beach carts made today. The continued escalation in horsepower wars by the PWC manufacturers has continued to add weight to some of the new watercraft coming into the market. This Bigfoot addresses the needs of those who feel they need the extra capability that 6 wheels bring to bear. It has a whopping 1500 lbs, of weight carrying capacity. It will accommodate any watercraft being made with ease. Also it will accept smaller outboard equipped boats, such as RIB inflatables or similar skiff type hulls.  It has the same rugged construction as the rest of our Bigfoot lineup. The support rails are 6’ long and overall length is 10’. Same 21” balloon tires. The optional ATV coupler would be recommended. 160 lbs. overall weight.

Bigfoot 6 wheel = $1149.00



 
BigFoot 2-Wheel – For launching and loading in any condition.
This is the original. The one to which all have been measured. If you don’t have access to a boat ramp, get a BigFoot. With this tote you can launch and load any PWC up to 650 lbs. anywhere and in any conditions. It does not need to be in the water to load your PWC. Run the rope out, hook it to the bow cleat and let the 1200 lb. winch do the rest. It will pull the PWC up and onto the tote, even if it has been beached. The big 21” diameter low pressure balloon tires are standard on this dolly. They allow you to move easily over any surface. Our marine grade aluminum framework and welded construction make this tote lightweight, yet the most rugged and durable of any on the market. A 1” stainless axle runs throughout the frame with stainless hardware and fittings. Quick attach pins allow easy disassembly for transport or storage. There is an optional ATV coupler kit available for low speed towing. Dimensions are 8’ long overall, 46: to the outside of the tires and 22” to the top of the support rails. Weight is 65 lbs.
Prices:
Bigfoot 2-wheel model
ATV Coupler 1 7/8" ball
                         2" ball
$579.00
$38.00
$41.00

Heavy duty bearing kit, recommended for towing, $8.00 per wheel
3rd. wheel kit for 2-wheel model $99.00
Adjustable support rails to accommodate Stand-up PWC $40.00
Also you can add an axle - Add Axle Kit Click Here





 

BigFoot 4-Wheel – Heavy duty landing gear for any PWC in any condition.
Here it is, a bigger BigFoot! This is the ultimate beach cart for any PWC. With its four jumbo 21” balloon tires and a 1000 lb. carry capacity it will work to float the weight over any surface. Same as the original, all you need to do is get the BigFoot to the waterline, attach the hook to the bow cleat, lift up on the grab handle and start turning the winch. It will pull the PWC onto the dolly and the dolly back under the PWC at the same time. You do not have to put the dolly into the water by using this method, safer when surf conditions are present. Huge support rails, 46” long, are covered with PVC, then again with carpet to offer the best hull support and protection. The welded framework is dimensionally bigger than any others on the market resulting in the superior strength needed to support the increased weight of recent watercraft on the market. Quite simply, you will not find a better built cart. Optional ATV coupler kits are available for low speed towing. Dimensions are 9’ long overall, 46” to the outside of the tires, 22” to the top of the support rails. Weight is120 lbs.
Prices:

Bigfoot 4-wheel model
ATV Coupler 1 7/8" ball
                         2" ball
$849.00
$38.00
$41.00
   

Heavy duty bearing kit, recommended for towing, $8.00 per wheel
3rd. wheel kit for 2-wheel model $99.00
Adjustable support rails to accommodate Stand-up PWC $40.00
Also you can add an axle - Add Axle Kit Click Here


 

Tiger Tote – For 1 – 2 person PWC in calm water
Float your PWC onto the Tiger Tote and wheel it to your trailer or storage area. These totes are great for calm water situations or if you have a dock or sea wall with a lift. We call these float on dollies as the tote must be in the water in order to let the PWC slide onto the support rails. The tote is trailer height for easy transfer and doubles as a shop work stand. The grab handle is adjustable and the Tote comes apart easily for transport or storage. Constructed of aircraft grade aluminum with stainless hardware. A solid 1” aluminum axle runs through the frame for strength. The 18” x 9.50” turf tire is standard which works best on a firmer surface. If in soft sand the 21” balloon tire may perform better and is available as an upgrade, $30.00 for the pair. The standard model fits older runabouts with 550 lbs. max capacity. There is a stand-up model available as well, the same as our standard only with narrower support rails at no extra charge. Make sure to specify when ordering. Dimensions are 7’ long, 42” wide to the outside of the tires, and 20” from the ground to the top of the support rails. Weight is 52 lbs.
Prices:

Tiger Tote 2-wheel model
Tiger Tote 2-wheel model for stand-up PWC
21" X 12" Jumbo tire upgrade
$479.00
$479.00
$40.00 per pair

 
Ski Buggy – For 3 passenger PWC in calm water
A king sized grab handle and 4 tires make launching and loading fast and easy. This tote will move up to 900 lbs. The framework is welded aircraft grade aluminum which results in incredible strength. The 18” turf tire is standard and works well on a firmer ground. If there is sand present we suggest using the 21” tire as it performs better on softer surfaces. The upgrade is $30.00 a pair. The heavy duty support rails are a big 44” long with a 2” diameter, covered with carpet to cushion and protect the hull. This tote is designed as a float on dolly which means it must be in the water in order to float the PWC onto it, best done in calm water. It works great for those applications where there is a dock or seawall lift and you need to get your watercraft to storage. Also doubles as a work stand or store display. The grab handle slips in and out for trailer loading. Dimensions are 8’ long overall, 42” to the outside of the tires, and 20” to the top of the support rails. Weight is 77 lbs.
Prices:
Ski Buggy 4-wheel model
21" X 12" Jumbo tire upgrade
$599.00
$40.00 per pair

Hosted and Designed By: © ABC Web Service